Philemon Saye Gbengan I

Intro Before I started to write this post, I thought that it would be nice to say some word about PPTP VPN and Mikrotik RouterOS, but then I realized that if you are reading this, there is no need to explain what is PPTP VPN server or Mikrotik RouterOS. Here is a simple step by step tutorial with images and all information that you need to get a fully working PPTP VPN server… Step 1: create VPN pool IP pools are used to define range of IP addresses that will be used for your PPTP VPN server [admin@MikroTik] > /ip pool print NAME RANGES VPN-pool 192.168.1.101-192.168.1.110 Step 2: create a VPN user In this step you will create a user that can connect to your VPN Server. In this example only one user is created, but you can add as many user as you need… [admin@MikroTik] > /ppp secret print # NAME SERVICE CALLER-ID PASSWORD PROFILE REMOTE-ADDRESS 0 ppp1 pptp ppp1 **** VPN-profile Step 3: create a VPN profile From wiki.mikrotik.com PPP prof

https://www.google.com/search?safe=strict&q=mtcna+pdf&oq=MTCNA+&gs_l=serp.1.1.0l10.14510.14510.0.17032.1.1.0.0.0.0.308.308.3-1.1.0....0...1c.1.64.serp..0.1.305.Lo5_EKP73XM

http://file.accesspoint.hu/pdf/uldis.pdf

DRAFT Document revision 15-May-2002 This document applies to the MikroTik RouterOS V2.5 Overview The MikroTik RouterOS has the following bandwidth management features: Queues, which can be set for certain traffic flows, are discussed in the current manual; Connection speed setting for PPPoE connections, see the PPPoE Interface Manual. Queuing is a mechanism that controls bandwidth allocation, delay variability, timely delivery, and delivery reliability. The MikroTik RouterOS supports the following queuing mechanisms: PFIFO - Packets Packet First-In First-Out, BFIFO - Bytes First-In First-Out, RED - Random Early Detection SFQ - Stochastic Fair Queuing The queuing can be used for limiting the bandwidth for certain IP addresses, protocols or ports. The queuing is performed for packets leaving the router through an interface. It means that the queues should always be configured on the outgoing interface regarding the traffic flow. If there is a desire to limit the traf